posted
Any printers out there have a recommendation for laminators. We currently have a 36" cold laminator needing parts. There are no parts available and the company who made the laminator is closing.
thanks if you can help
-------------------- Bill Diaz Diaz Sign Art Pontiac IL www.diazsignart.com Posts: 2118 | From: Pontiac, IL | Registered: Dec 2001
| IP: Logged |
posted
We have a GFP https://www.gfpartnersllc.com/ Very happy with it. Over the years we had a couple problems with it, when we contacted support we got quick response and they were very helpful. The parts we needed were available and we had them in a couple days.
-------------------- Dennis Raap Raap Signs Posts: 845 | From: Coopersville, MI | Registered: Feb 2003
| IP: Logged |
posted
Hi Bill! I've had a Royal Sovereign for about 18 years and it has performed flawlessly and probably will for another 18 years. I would hesitate to recommend this to you.
posted
Bill, we also have the GFP 54" laminator. A bit os a learning curve, overall were happy with it. Haven't needed any support yet, but according to Dennis, they do well with that too
""Good judgment comes from experience; and a lot of that comes from bad judgment" - Will Rogers Posts: 3521 | From: Beautiful Newaygo, Michigan | Registered: Mar 2003
| IP: Logged |
posted
thanks! Ironically we're looking hard at both those brands. We're familiar with the Royal Sovereign brand but the GFP is less money and seems a little simpler which is attractive to us.
thanks again!
-------------------- Bill Diaz Diaz Sign Art Pontiac IL www.diazsignart.com Posts: 2118 | From: Pontiac, IL | Registered: Dec 2001
| IP: Logged |