posted
Hi again guys. I recently bought a used Gerber Edge, but there are certain effects that I need to create (halftone gradients, mainly), and I have no idea how to do them. Any suggestions on where I can get training to use this software? I'm sure I could find plenty on Google, but I'm wondering if any Letterhead could make a suggestion, based on their own experience!
Thanks always, Felix
-------------------- Felix Marcano PuertoRicoSigns.Com Luquillo, PR
Work hard, party like a tourist! Posts: 2274 | From: Luquillo, Puerto Rico, USA | Registered: Nov 2000
| IP: Logged |
We used to go to a site called 4edge talk, not sure if it's still a live site anymore. so at this point just post what you need t oask and some of will try to help.
-------------------- Bob Rochon Creative Signworks Millbury, MA 508-865-7330
"Life is Like an Echo, what you put out, comes back to you." Posts: 5149 | From: Millbury, Mass. U.S. | Registered: Nov 1998
| IP: Logged |
posted
Felix, I'm assuming you have Omega. Go to the fill tool, looks like a paint bucket, select "gradient" linear or radial. The rest is self explanatory. It looks like a lot of videos on Youtube.
-------------------- Chuck Peterson Designs San Diego, CA Posts: 1050 | From: San Diego, CA USA | Registered: Nov 1998
| IP: Logged |
posted
Felix, I still use Omega software, but had to wing it, as I didn't get any training from who I bought it from; if you find out where please drop me a note here or my email. Good luck and thanks!
p.s. I don't use an edge but still a gerber 4b! Can you imagine.
-------------------- Deb Fowler
"It's kind of fun to do the impossible - Walt Disney (1901-1966) Posts: 5373 | From: Loves Park, Illinois | Registered: Aug 1999
| IP: Logged |
posted
Hey Deb, yes I can. My breaks once in a while and I'm ready to buy a new machine and then it turns out it just needs a little spring or something cleaned off and it just keeps going. I don't use it as much anymore or I probably would get a new faster one.
-------------------- Chuck Peterson Designs San Diego, CA Posts: 1050 | From: San Diego, CA USA | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic