posted
Depends...you mean before painting the vinyl? Alcohol works fine for cleaning before airbrushing, Kryloning etc. Rapid tack works fine too. But for airbrushing with water based such as Createx, most people scuff the vinyl with a 3M pad to provide more tooth.
------------------ Dave Sherby "Sandman" SherWood Sign & Graphic Design Crystal Falls, MI 49920 906-875-6201 ICQ: 21604027 sherwood@up.net
Posts: 5396 | From: Crystal Falls, MI USA | Registered: Apr 1999
| IP: Logged |
posted
Tim..For cleaning before painting on vinyl I use wax and silicone remover, available at any auto parts store like NAPA. If you just want to clean it because it is dirty try soap and water.
by the way...DID YOU KNOW THAT YOUR CAPS LOCK WAS STUCK ON???????? (MY EARS ARE RINGING FROM ALL THAT SHOUTING!!!)
------------------ Dave Grundy shop#340 AKA "applicator" on mIRC "stickin' sticky stuff to valuable vessels and vehicles!" in Granton, Ontario, Canada 1-519-225-2634 dave.grundy@odyssey.on.ca www.odyssey.on.ca/~dave.grundy "A PROUD $ supporter of the website"
Printer-friendly view of this topic