posted
Can anyone tell me how to export to corel draw from Signlab 5. eps won't work. It will work if I simplify everything, such as no outlines or drop shadows or even some fancy shaped panels. I can't even get ai to export. It only does about half. Even after it has been converted to curves. thanks....John Arnott
[ September 18, 2001: Message edited by: John Arnott ]
-------------------- John Arnott El Cajon CA 619 596-9989 signgraphics1@aol.com http://www.signgraphics1.com Posts: 1443 | From: El Cajon CA usa | Registered: Dec 1998
| IP: Logged |
When you say you can't get AI to export, do you mean that it just won't do it, or that it does it but doesn't import into Corel? If there is a problem where it is stopping at some point during the export, you may have a deeper problem than what I am about to say.
I've always been used to exporting in the AI format (Signlab 3.1), but I've noticed that I have problems in Signlab 5 unless I convert any text in the Signlab file to graphics. Then it works fine. So if there's text in the Signlab file, convert the text to graphics and see if it will export properly.
Other problems might be if you have bitmaps or complex gradient fills... I've never really dealt with them in Signlab, so I can't say.
-------------------- Bob Darnell London, Ontario, Canada
posted
I have signlab version 5.3 I just export as an eps file, then in Corel 8 or 9, I have both, I import it as a post script interpreted, the eps filter in corel is flawed but it works fine as postscript interpreted it will import eps, or ps. Also the AI filter works fine in corel and signlab. I hope this helps, sometimes I just copy and paste into signlab from corel, but it doesn't always work the other way. Bill
[ September 18, 2001: Message edited by: Bill Biggs ]
-------------------- Bill & Barbara Biggs Art's Sign Service, Inc. Clute, Texas, USA Home of The Great Texas Mosquito Festival Proud 10 year Supporter of the Letterheads Website www.artssigns.com "MrBill-" on the chat page MailTo:biggsbb@sbcglobal.net Posts: 1020 | From: Lake Jackson,Tx | Registered: Nov 1998
| IP: Logged |
posted
To import SignLab 5.0 files into Corel,I found that importing as an ai works best for me. BUT...first you must ungroup everything in the SignLab .cdl file. After you ungroup the file..select it and export to an .ai, then import into Corel. Sometimes I weld the SignLab file first...that works just like ungrouping it. Good Luck! Judy
[ September 18, 2001: Message edited by: Judy Pate ]
-------------------- Judy Pate Signs By Judy Albany, Georgia USA 229-435-6824
Live simply...Love generously...Care deeply...Speak kindly...Leave the rest to God. Posts: 2621 | From: Albany,GA,USA | Registered: Nov 1998
| IP: Logged |
posted
signlab 5.63 to corelle9 just cut and paste these two actually talk to each other
-------------------- Ian Wilson Signmaker Retired 3 Panorama Drive Toowoomba Queensland Australia may all your troubles be little ones. The man that never make a mistake never makes anything. Posts: 656 | From: Toowoomba Queensland Australia | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic