posted
I have noticed in short order that vinyl is much easier to weed with the backing up towards you, using it to peel off instead of the transfer paper. By rolling it sharply the letters break from it with a lot less problem than they do by rolling the transfer paper. Has anyone else did this? What are your tricks at this? Bronzeo
------------------ Jack Davis 1410 Main St Joplin, MO 64801 www.imagemakerart.com bronzeo@prodigy.net http://www.imagemakerart.com
Posts: 1549 | From: Joplin, MO | Registered: Mar 2000
| IP: Logged |
posted
That is how I always do it, Jack. Makes it a lot faster and easier. It also takes the stress off of the transfer tape so it doesn't become stretched or distorted.
------------------
I don't suffer from insanity. I enjoy every minute of it!
:) Design is Everything! :) Glenn Taylor in beautiful North Carolina
posted
That's the way I do it too, Jack. Also helps to keep the knife force just enough to cut through the vinyl, no more, no less.
------------------ Wayne Webb Webb Sign Studio,Inc. Blastin' "woodesigns" in The Sunshine State "autograph your work with excellence" webbsignstudio@digitalexp.com
Posts: 7403 | From: Chipley,Florida,United States | Registered: Oct 1999
| IP: Logged |
posted
Ive been doing it that way so long, it never occured to me that everyone didn't automatically do it the same way. Since you mention it, some other automatic things occurs to me now for those who are new or never had any training in such matters - 1) I ALWAYS weed from right to left. In general, most 'open' letters (E, G, C, L) face right, and will weed right out if you are pulling from the right to left. 2) For smaller copy under 6", while weeding, pull away from copy (to the right) while lifting. This is so effective, that on copy under 2" you can even 'snap' the vinyl in quick jerks weeding several letters a second. and 3) after the copy is burnished down, I peel the premask off at a full 180degree angle back over the letters, not lifting up. It's a whole lot easier to demonstrate than say. Come to Letterheads & Lobstahs in Stonington in June and I'll show you what I mean.
posted
Hey, Jack..........Your method has been our MO for 22 years. I'm amazed that no one has ever put out a book or something on the basics of vinyl film work. There must be some money in there somewhere for someone. :^)
------------------ St.Marie Graphics & Makin' Tracks Sound Studio Kalispell, Montana Mkntraks@digisys.net Carving America into a better shape! PEACE, through superior chisel-power! We're chiseling every day of the week! :^)
posted
That is'nt the only thing I do upsidedown,....when not using a Weber Tool for masking I will roll-out my app-tape sticky side-up and then place my graphics "face-down" atop it, then squeegee.
------------------ Rich Stebbing #945 RichSigns Rohnert Park CA
Posts: 755 | From: Rohnert Park, CA | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic