posted
Not if it's coated with Pelucid. This is one We've already had tested for us in Florida.
------------------ St.Marie Graphics & Makin' Tracks Sound Studio Kalispell, Montana stmariegraphics@centurytel.net http://www.stmariegraphics.com 800 735-8026 We're chiseling every day of the week! :^)
I have my van all lettered up with Edge printed Graphics. For Three years now the vertical sides are still looking bright and fresh. I live in Illinois where the roads are salted every day of the winter it seems and that stuff turns my brown van to white.
So, without any top coat protection, they have held up pretty good, and these are the 4 color process prints.
I also have the hood lettered up with a 4 color process print...and it only lasted 2 and 1/2 years exposed to direct uv rays constantly.
What effects Edge prints more than anything is gasoline. If you spill gasoline on an Edge print and then try to wipe it off the print will come off also. If this ever happens, just let the gas evaporate, and the print will be saved.
Hope this helps.
------------------ Draper The Signmaker Bloomington Illinois USA My Next Article In The April Issue of Sign Builder Illustrated covers step by steps on "digital airbrushing" YOU CAN DO! 309-828-7110 drapersigns@hotmail.com Draper_Dave on mIRC chat
Posts: 2883 | From: Bloomington Illinois USA | Registered: Nov 1998
| IP: Logged |
posted
kieth..got any reletives over near weirton west viginia...new a couple slack's.... the old man the called him "kerrnel"...you know the military rank, and his son bob.
------------------ joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-944-5060 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND
Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic