posted
Does anyone know of any barbed wire clip art? NOTICE!!!!!!! not asking for any free just point me in the direction. Went through the "search" deal for a font a few weeks back. A font I had at one time and lost in changing computers. Two and a half hours later I had the needed font...............to be used to cut....you guessed it, four 2" numbers. Oh the wonders of the computer age The numbers had to be vinyl to match existing numbers. The barbed wire is for a vinyl pinstripe UGHHHHHHH!!! Here are two examples of when a computer is DEFINATELY NOT faster.
------------------ George Perkins Millington,TN. goatwell@ionictech.com
"I started out with nothing and still have most of it left"
I got some somewhere, its MY clipart, desinged by me, ...if I can remember where it is!
How soon you need it?
------------------ Draper The Signmaker Bloomington Illinois USA Stop in and visit a while! 309-828-7110 signman@davesworld.net Raptorman or Draper_Dave on mIRC chat
Posts: 2883 | From: Bloomington Illinois USA | Registered: Nov 1998
| IP: Logged |
posted
Try Vinyl Graphics...they have a large selection of graphics and striping for cars and trucks and I recieved a flyer the other day which showed a new product...barbed wire pinstriping! 1-800-521-1884
------------------ Mark Perkins Performance Signs & Graphics Eunice, Louisiana "The heart of Cajun Country"
------------------ Draper The Signmaker Bloomington Illinois USA Stop in and visit a while! 309-828-7110 signman@davesworld.net Raptorman or Draper_Dave on mIRC chat
Posts: 2883 | From: Bloomington Illinois USA | Registered: Nov 1998
| IP: Logged |
posted
HEHEHEHE I got it off this BB a couple of years ago too. I saved it as a Corel file called.....guess what??....barbedwire.cdr. Sent it off to George also.
------------------ Dave Grundy AKA "applicator" on mIRC "stickin' sticky stuff to valuable vessels and vehicles!" in Granton, Ontario, Canada 1-519-225-2634 dave.grundy@quadro.net www.quadro.net/~shirley
posted
george, I recently purchased a sample clip art package from Smart Designs 1-800-959-7627 that included the barbed wire striping you are looking for. it also included some sample programs that are made to work with corel draw. I used the barbed wire on a race car I just did, and it worked great. I think I paid about $50.00 for it. Hope this helps, Rich
------------------
Posts: 31 | From: Allentown, PA, USA | Registered: Oct 2000
| IP: Logged |
posted
I must be missing something here. Barbed wire = wavy line over top of wavy line with some pointy x's and a couple of lines crossing. Is this a certain clip art your looking for? Seems my 7 year old could draw it faster than a post to ask for it. I am very confused.
------------------ Designing... it's like an itch in the brain... an itch you can't scratch, that if you can figure out how to scratch it, it just itchs more
posted
What is there to be confused about? Quite a while back, someone had posted about the fact that they had said clip art and many of us received the file. While I can't speak for George, I would think that he was looking for this particular file and figured he'd ask one his friends here if they happened to have it; I'd have done the same thing. I happen to still have the file AND I know where it is but it looks like more than one person has already offered it to George.
Does that clear up your confusion, Mark?
------------------ “Life shrinks or expands in proportion to one's courage.” - Anais Nin www.samazon.com sam@samazon.com
Posts: 387 | From: Minneapolis, Minnesota, USA | Registered: Nov 1998
| IP: Logged |
posted
Yup, confusion cleared... Knew it had to be something like that ... seen George's beautiful work before (hence the confusion ... too many beers didn't help either I guess hahaha)
------------------ Designing... it's like an itch in the brain... an itch you can't scratch, that if you can figure out how to scratch it, it just itchs more
posted
Hey Ken...Look in your e-mail...I think it is in there somewhere! I figger if Draper made it and gave it to anyone who wanted it then it is still "freeware"!
------------------ Dave Grundy AKA "applicator" on mIRC "stickin' sticky stuff to valuable vessels and vehicles!" in Granton, Ontario, Canada 1-519-225-2634 dave.grundy@quadro.net www.quadro.net/~shirley
posted
I asked my Wife to Draw up 3 Different pieces of Barb Wire...Less then 5-7 Minutes..They were done..! She is in Insurance and not Graphic Business So...Would you like to see them?. "Jpeg" files...
Raven/2001
------------------ Raven/2000 Airbrushed by Raven Lower sackville N.S. deveausdiscovery@sprint.ca
Posts: 4327 | From: Lower Sackville, Nova Scotia, Canada | Registered: Jan 2000
| IP: Logged |
The numbers had to be vinyl to match existing numbers. The barbed wire is for a vinyl pinstripe UGHHHHHHH!!!
but it looks like more than one person has already offered it to George.
Printer-friendly view of this topic