posted
I have a Roland Camm-1 PNC1100 Plotter and I can't find a cutter strip for it. Roland says they don't make them anymore. The old part number XD-CPS-14 has also been changed to a different numerical system. The Roland Rep said the only size spec she could find was 1/8" x 24". This plotter is a workhorse and has been running since 1992 with minor problems.
Any help? John
-------------------- John and Diana Grenier Up North Studio Les Cheneaux Islands Art Gallery P.O. Box 83 Hessel, MI 49745 906-322-2886 www.lescheneauxislandsartgallery.com Posts: 50 | From: Hessel, MI (Eastern U.P.) | Registered: Apr 2003
| IP: Logged |
posted
Easy— sandblast material works great. It adheres well and although it's softer, it's not soft enough to matter. Even though it wears out, it's cheap to replace.
Oh, wait, that's not what I'm using now— I'm using that banner edge non-curl tape. I had to layer it up to 3 thicknesses, but it's not as soft as the sandblast material.
-------------------- Frank Smith Frank Smith Signs Albany, NY www.franksmithsigns.com Posts: 807 | From: Albany, NY USA | Registered: Nov 1998
| IP: Logged |
posted
john, the cutting strip in rolands.....ARE ALL THE SAME from the PNC-1000 to the CX-300, 400, 500....just different lengths......so for a PNC-1100, WHICH IS A 24" machine.......get a cutting stripe for a CM/CX-24, CX/CM-300......you will have to cut the CM/CX-300 down to fit.
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
Ebay from Hong Kong $3.50 inc postage or somethng like that - but you need to get the width correct.
-------------------- "Stewey" on chat
"...there are no limits when you aim for perfection..." Jonathan Livingston Seagull Posts: 7014 | From: Highgrove via Toowoomba, Queensland, Australia | Registered: Dec 2002
| IP: Logged |
posted
Thank you all I will search with the new info. John
-------------------- John and Diana Grenier Up North Studio Les Cheneaux Islands Art Gallery P.O. Box 83 Hessel, MI 49745 906-322-2886 www.lescheneauxislandsartgallery.com Posts: 50 | From: Hessel, MI (Eastern U.P.) | Registered: Apr 2003
| IP: Logged |