posted
Hi Folks, I've just uploaded a couple more videos to Youtube, of me doing a bit of striping. They're old footage from a couple of years ago or more, but they may interest a few here.
(You can find others there-mainly dual striper use- by searching my name!)
Hope they might amuse some people! Enjoy!
[ August 28, 2013, 07:21 PM: Message edited by: Ian Stewart-Koster ]
-------------------- "Stewey" on chat
"...there are no limits when you aim for perfection..." Jonathan Livingston Seagull Posts: 7014 | From: Highgrove via Toowoomba, Queensland, Australia | Registered: Dec 2002
| IP: Logged |
posted
Amuse?, No way, this is perfection personified.
-------------------- Bill Riedel Riedel Sign Co., Inc. 15 Warren Street Little Ferry, N.J. 07643 billsr@riedelsignco.com Posts: 2953 | From: Little Ferry, New Jersey, USA | Registered: Feb 1999
| IP: Logged |
posted
No, Bill, I'm flattered by the thought, but it's probably an illusion, more likely!
-------------------- "Stewey" on chat
"...there are no limits when you aim for perfection..." Jonathan Livingston Seagull Posts: 7014 | From: Highgrove via Toowoomba, Queensland, Australia | Registered: Dec 2002
| IP: Logged |
Making the simple complicated is commonplace; making the complicated simple, awesomely simple, that's creativity. — Charles Mingus Posts: 6717 | From: Mendocino, CA. USA | Registered: Nov 1998
| IP: Logged |
posted
"self charging" ? I haven't heard of that one, Rick!
I was surprised we didn't get a video of me doing the fine lines on the felloes or spoke sides. you can get a longish way with one dip or palleting in the paint.
I might have to see if I can find some old videos of that part...they might be wobbly though.
-------------------- "Stewey" on chat
"...there are no limits when you aim for perfection..." Jonathan Livingston Seagull Posts: 7014 | From: Highgrove via Toowoomba, Queensland, Australia | Registered: Dec 2002
| IP: Logged |