posted
Ok got new computer win 8 nor printer port.Bought usb cable and computer reconised it but it shows as a printer and of course won't work cutter.Probably needs a driver for the roland usb? ANY HELP OUT THERE? Thanks Ernie
-------------------- Ernest Clark Dahlonega Sign Co. 101 Whispering Winds Dr Murrayville,Ga 30564 Been there, Done that, Probably do it again. Posts: 134 | From: Dahlonega,Ga. USA | Registered: Dec 1998
| IP: Logged |
posted
Sorry got it figured out.Working great.Thanks any way. Ernie
-------------------- Ernest Clark Dahlonega Sign Co. 101 Whispering Winds Dr Murrayville,Ga 30564 Been there, Done that, Probably do it again. Posts: 134 | From: Dahlonega,Ga. USA | Registered: Dec 1998
| IP: Logged |
posted
To help any of us in the same situation - what did you do & how did you fix it to work?
-------------------- "Stewey" on chat
"...there are no limits when you aim for perfection..." Jonathan Livingston Seagull Posts: 7014 | From: Highgrove via Toowoomba, Queensland, Australia | Registered: Dec 2002
| IP: Logged |
posted
I'm using the new VMPXPT sign program.I hooked the usb to parallel cable to printer cable to my roland camm1 cutter then to usb on computer then turned on my plotter,computer reconised the hook up.went into setup in my sign program and set up plotter on usb002 port.Was easy when I got my head togeather.Hope this helps someone. Have any questions feel free to email me. Ernie
-------------------- Ernest Clark Dahlonega Sign Co. 101 Whispering Winds Dr Murrayville,Ga 30564 Been there, Done that, Probably do it again. Posts: 134 | From: Dahlonega,Ga. USA | Registered: Dec 1998
| IP: Logged |