posted
I need to make up a pine cone approx. 8" tall, and I am considering using magicsculpt. I am thinking about building the piece around an egg shaped piece of HDU.
Does this material stick easily to raw HDU?
-------------------- Curt Stenz Graphics 700 Squirrel Lane Marathon, WI 54448 Posts: 590 | From: Marathon, WI 54448 | Registered: Dec 1998
| IP: Logged |
magic sculpt sticks to a lot of things really well
-------------------- Jon Peterman 200 Summit Loop Grants Pass, OR -------------------- a.k.a. dc-62 success is in Jesus Christ Posts: 434 | From: grants pass or. usa | Registered: Nov 1998
| IP: Logged |
posted
The key is to press on a thin 'primer coat' of sculpt first. Then you can use water to do the detail as you add more so your tools and hands don't stick to the medium.
-grampa dan
-------------------- Dan Sawatzky Imagination Corporation Yarrow, British Columbia dan@imaginationcorporation.com http://www.imaginationcorporation.com
Being a grampa is one of the the most wonderful things in the world!!! Posts: 8738 | From: Yarrow, B.C. Canada | Registered: Nov 1998
| IP: Logged |