posted
King International Corp, has die cuting capability with whatever substrate you need.I do not know what their quanitity amounts are.This is the number to reach them here in NC.
Chris Smith KIC CORP 336-983-5171
-------------------- Bill Wood Bill Wood, Sign Artist 3628 Ogburn Ave., NE Winston-Salem, NC 27105-3752 336-682-5820 Posts: 397 | From: Winston-Salem, NC | Registered: May 2006
| IP: Logged |
posted
You might be better off cutting them on your router since even a simple die can be very expensive. But if getting the material is a problem, maybe one of these would help. Some materials can be laser cut, eliminating the expense of making a die.
posted
finding material was my problem, no one around here carried anything that thin, and you had too buy way too many sheets to get them to order it. I had someone quoting this, but still haven't heard from them. Thanks guys, I'll try some of these.
-------------------- Wayne Webb Webb Signworks Chipley, FL 850.638.9329 wayne@webbsignworks.com Posts: 7403 | From: Chipley,Florida,United States | Registered: Oct 1999
| IP: Logged |
posted
Hi Wayne - here is one more reference to try: Cope Plastics Inc. - they have a shop in Godfey, IL and Vadnais Heights, MN. www.copeplastics.com Ann Bell is my contact person, here in MN, and the toll free # is: 1-866-834-4792 They carry every kind of plastic you want, and have the knowledge that goes with it. They are very nice folks and can give you a free quote. I hope this helps!
-------------------- Kathy Weeks Weeks-End Signs & Graphics Lake Elmo, Minnesota Posts: 249 | From: Lake Elmo, Minnesota | Registered: Mar 2009
| IP: Logged |
Printer-friendly view of this topic