posted
How's everyone? Don't laugh but I need a Lynx 60 driver for Windows 98. After I sold the shop I kept my first cutter which never worked on anything but Win98, even though they told me differently. Sooo,long story cut short, I have a few private projects and need to use the cutter ASAP. I have an old PC that had Win 98 re-installed and works just fine but I can't find the driver. Looked for a download on the internet and could not find it either. Ooooh, I didn't realise it was THAT old. Does that mean I am getting old? Never mind, any help/tips would be greatly appreciated. Nice talking to you guys again!
posted
Go here you will need to download the win 9x driver for your plotter,if this doesn't work you might be able to use an old roland pnc 1000a driver many of the chinese plotters will work with that driver, they can be found here you'll need to choose pnc 1000-1000a from the drop down list and then click search, ...hope this helps ya,...
[ June 12, 2010, 10:46 PM: Message edited by: Tim Barrow ]
-------------------- fly low...timi/NC is, Tim Barrow Barrow Art Signs Winston-Salem,NC Posts: 2224 | From: Winston-Salem,NC,USA | Registered: Nov 1998
| IP: Logged |
posted
Thanks so much Tim, it's exactly what I needed! Now I'm still trying to get the right connection/port/cable so it will cut, but I should be able to figure that out. Have a wonderful weekend.
![[Thanks]](graemlins/thanks.gif)
Printer-friendly view of this topic