posted
A friend of mine was trying to remove the name of a sailboat that was hand painted. My guess is that it was most likely One Shot. I suggested he sand it off but he didn't like the idea. It is his 24' race boat that was built very light and therefore has a thin gel coat surface.
But I can't think of any alternative to sanding.
Appreciate any ideas?
-------------------- Dave Kleinman 2406 Orleans Dr Cedar Park, TX Posts: 17 | From: Austin, TX | Registered: Jul 2003
| IP: Logged |
posted
Easy-Off oven cleaner has always worked for me. The yellowish haze can be removed with a buffer and some mild rubbing compound.
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
Follow the instructions explicitly. Do not use in the sun.
Great stuff.
-------------------- Bruce Bowers
DrCAS Custom Lettering and Design Saint Cloud, Minnesota
"Things work out best for the people who make the best of the way things work out." - Art Linkletter Posts: 6451 | From: Saint Cloud, Minnesota | Registered: Jun 1999
| IP: Logged |
posted
I think ya gotta be more specific Bill and Dave as its the original formula of Easy-Off oven cleaner in the yellow can which works for that method.
Am I not right?
-------------------- HotLines Joey Madden - pinstriping since 1952 'Perfection, its what I look for and what I live for'
posted
Since it is gel coat you can also use lacquer thinner or even acetone, followed up with a buffer and compound. In any case use proper safety gear. I would use plastic to mask around the lettering to keep the overspray and mess to a minimum if using Easy-off. Easy-off will work on painted surfaces also, but it is always a good idea to do a test somewhere to be sure it won't attack the substrate.
-------------------- Life is not about waiting for the storm to pass... It's about learning to dance in the rain ! Jim Moser Design 13342 C Grass Valley Ave. Grass Valley, Ca. 95945 530-273-7615 jwmoser@att.net Posts: 488 | From: Grass Valley, Ca. | Registered: May 2006
| IP: Logged |
posted
Don't get the heat activated kind, the yellow original is the one to use as the guys suggested. Spray on and leave for a few minutes, then wipe, rinse repeat.. maybe a few times.
-------------------- "Keep Positive"
SIGNS1st. Neil Butler Paradise, NF Posts: 6277 | From: St. John's NF Canada | Registered: Mar 1999
| IP: Logged |
posted
Yellow can Easy-Off, the haze can be removed with a clorox wash, but it will fade by itself after a few days in the sun. If the lettering has been on for a long time, the paint will have "etched" itself slightly into the gel coat, in which case you'll need to get some black 600 grit sandpaper and wet-sand it.......
-------------------- www.signcreations.net Sonny Franks Lilburn, GA 770-923-9933 Posts: 4115 | From: Lilburn, GA USA | Registered: Feb 1999
| IP: Logged |
posted
Sonny....I have never figured out why, after removing One Shot, the gel coat is "raised" where the lettering was???
Any ideas?
And yes, original Easy-off, in the yellow can is the only one that works. For some reason none of the rest do and no other brands of oven cleaner seem to either.
An additional tip, thanks to the late Mike McCloud.
If the paint is really heavy, use masking tape to attach Saran Wrap below the lettering. Spray the lettering then flip up the Saran Wrap and "smear" it over the Easy Off. It will keep the fumes from dissipating and make the paint removal more effective.
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
posted
Yellow-can Easy-off is the only formula that contains lye, which is the active ingredient. That's why it works, and others don't.
-------------------- "A wise man concerns himself with the truth, not with what people believe." - Aristotle
Cam Bortz Finest Kind Signs Pondside Iron works 256 S. Broad St. Pawcatuck, Ct. 06379 "Award winning Signs since 1988" Posts: 3051 | From: Pawcatuck,Connecticut USA | Registered: Nov 1998
| IP: Logged |
posted
That's interesting, Dave, about the 'shadow' of the old lettering. I've noticed it too; not just on gelcoat, but other paints too.
My cousin bought a '57 Chevy in 1965 that a guy had bought new and ran on the drag strip for several years. It was all lettered up when he bought it. Wanting to make a street car out of it, he stripped it to bare metal, primed and painted it ( acrylic lacquer). After it was done and buffed out......if you'd look at it in just the right light from the right angle, you could still see a faint 'ghost' of the old lettering. ......wierd.
-------------------- Dale Feicke Grafix 714 East St. Mendenhall, MS 39114
"I can do all things through Christ, who strengthens me." Posts: 2963 | From: Mendenhall, MS | Registered: Apr 1999
| IP: Logged |
quote:My cousin bought a '57 Chevy in 1965 that a guy had bought new and ran on the drag strip for several years. It was all lettered up when he bought it. Wanting to make a street car out of it, he stripped it to bare metal, primed and painted it ( acrylic lacquer). After it was done and buffed out......if you'd look at it in just the right light from the right angle, you could still see a faint 'ghost' of the old lettering. ......wierd.
Had the same thing happen.
[ March 20, 2009, 06:56 PM: Message edited by: Dan Beach ]
-------------------- Dan Beach Cylinder 9 Designs 1650 Glassboro Rd Sewell, NJ 08080 Posts: 625 | From: South Jersey | Registered: Sep 2008
| IP: Logged |
posted
We use the waterless hand cleaner made by ICC. I've squirted a generous portion on my hand and slapped it onto the boat and rubbed the lettering off and then washed my hand and the hull with water.
-------------------- The SignShop Mendocino, California
Making the simple complicated is commonplace; making the complicated simple, awesomely simple, that's creativity. — Charles Mingus Posts: 6712 | From: Mendocino, CA. USA | Registered: Nov 1998
| IP: Logged |
posted
Thank you very much for all of the help. I used to do a lot of airbrushing and I thought it was easy off but then (I thought?) I remembered something about vinyl removal using it. In any case, thanks again!!!!
-------------------- Dave Kleinman 2406 Orleans Dr Cedar Park, TX Posts: 17 | From: Austin, TX | Registered: Jul 2003
| IP: Logged |
Printer-friendly view of this topic