posted
Does anyone have a source for decorative bolts suitable for exterior use? I need to attach a large panel of PolyCore pvc to a sheet of DiBond and I'd like the bolt heads to look like a part of the design if I can.
-------------------- Dave Sherby "Sandman" SherWood Sign & Graphic Design Crystal Falls, MI 49920 906-875-6201 sherwoodsign@sbcglobal.net Posts: 5400 | From: Crystal Falls, MI USA | Registered: Apr 1999
| IP: Logged |
posted
Hi Dave. Since no one else has volunteered any possible solutions, here's one you may consider.
Using threaded rod, a washer, and a nut as your fastener, leave some threaded rod exposed past the nut & washer. You now have an additional thread available, onto which you can screw a decorative drawer pull, of which are a pretty good selection at any Lowes/Home Depot etc. Just make certain that the hardware drawer pull you select matches up with the thread count on the threaded rod you buy. Countersink the washer/nut just a bit so that your drawer pull will set flush to the top surface.
Hope this suggestion helps.
-------------------- Ken Henry Henry & Henry Signs London, Ontario Canada (519) 439-1881 e-mail: kjmlhenry@rogers.com
Why do I get all those on-line offers to sell me Viagara, when the only thing hardening is my arteries ? Posts: 2684 | From: London,Ontario, Canada | Registered: Feb 1999
| IP: Logged |
posted
Check your E-mail. I am doing a job right now where I have to have doctor name panels to be removable.
Any questions call.
-------------------- Sam Staffan Mackinaw Art & Sign 721 S. Nokomis St. Mackinaw City, MI dstaffan@sbcglobal.net Posts: 1697 | From: Mackinaw City, MI | Registered: Mar 2004
| IP: Logged |
Printer-friendly view of this topic