posted
I need one of you people with one of those handy dandy print/cut machines to give me a quote on getting some t-shirt transfers printed up on white "specialty material". Depending on the price, I need at least 20, but 40 would be even better. Send me your e-mail and I'll send you the file of what I'd like to have. We've been wearing the same old ratty t-shirts to the race track for about 5 years now!
Posts: 51 | From: Spout Spring, VA. | Registered: Feb 2005
| IP: Logged |
posted
Beth, I tried to email you but it was returned. I have been doing these for 6 years. Email me your file and I will take a look at it. I print these with my Edge.
-------------------- Cynthia Pack 246 Diamondview Loop Galax, Va. 24333 Posts: 659 | From: Galax, Virginia USA | Registered: Mar 2001
| IP: Logged |
posted
I regularly print what I want on glossy paper and bring it to the local litho shop and have them make the transfers for me. Theirs seem to hold together for many years, and a local shirt shop charges a buck a shirt to press them on. The transfers cost me $3 a sheet. So, for $4 and a shirt, I have a product. I also find places that sell decent shirts for less than $2 each.
-------------------- The SignShop Mendocino, California
Making the simple complicated is commonplace; making the complicated simple, awesomely simple, that's creativity. — Charles Mingus Posts: 6713 | From: Mendocino, CA. USA | Registered: Nov 1998
| IP: Logged |
posted
Cynthia- I tried sending an e-mail with the files to the address on your e-mail you sent-it was returned by Mailer Dameon saying unknown address?? Then I tried your e-mail address on here and it was returned- reason said something about "over quota"- don't know what this means, maybe your inbox is full or maybe the files are to large?...will try sending just the jpeg so you can take a look...if that doesn't work give me some more e-mail addresses and I'll try that. Also, if you want give me a call at 434-352-8006. Thanks
Posts: 51 | From: Spout Spring, VA. | Registered: Feb 2005
| IP: Logged |
posted
I think that one went through. I know you will need some time to figure up a price, but let me know if you even got it, so I can try something different if not.
Posts: 51 | From: Spout Spring, VA. | Registered: Feb 2005
| IP: Logged |
Printer-friendly view of this topic