We use CasMate Pro. It is a Windows 98 software that will not run on XP, etc. Amiable Scanvec will not support this product anymore and I do not like running multiple computers to run our equipment. I am looking for new CNC software to run on XP. What do you suggest? We have a Vytek 4x8 router.
TIA
-------------------- Jerry VanHorn, Pres. Pure Sports Designs, LLC Pro Sign Design / United Wholesale Signs www.prosigndesign.comwww.unitedwholesalesigns.com West Liberty, OH 937-465-0595 866-942-3990 Since 1990 Posts: 925 | From: West :Liberty, OH | Registered: May 2004
| IP: Logged |
posted
For simple v-carving and cutting out I'd check out Vectrics stuff. Looked pretty cool at the sign show. I believe they used to be developers for ArtCam.
posted
We are running EnRoute Pro 3 on a 64 bit system with XP. Runs good!
-grampa dan
-------------------- Dan Sawatzky Imagination Corporation Yarrow, British Columbia dan@imaginationcorporation.com http://www.imaginationcorporation.com
Being a grampa is one of the the most wonderful things in the world!!! Posts: 8738 | From: Yarrow, B.C. Canada | Registered: Nov 1998
| IP: Logged |
-------------------- Jerry VanHorn, Pres. Pure Sports Designs, LLC Pro Sign Design / United Wholesale Signs www.prosigndesign.comwww.unitedwholesalesigns.com West Liberty, OH 937-465-0595 866-942-3990 Since 1990 Posts: 925 | From: West :Liberty, OH | Registered: May 2004
| IP: Logged |
posted
Jerry I to have a 4'X 8' Vytek and use an older version of enroute to run it. I had to replace a voltage regulator in the machine about 3 weeks ago(machine crapped out while cutting PVC letters for another letterhead, and as figures it has never quit on me and this was a rush job) so I asked about software upgrades and was told by vytek that the newer software won't run it through a Vytek driver and Vytek doesn't make any new drivers because they don't make routers anymore just lasers.
But If I called someone at an enroute dealer near us (Vytek is only 20 min away from me) they could set me up with a new enroute and a driver from another machine that would work. I wrote the name of the company to call on a scrap near the router I will try to find it tomorrow.
Lets keep in touch on this one because upgrading is something I am interested in also.
Keep in touch. JAKE
-------------------- Jake Lyman Lyman Signs 45 State Road Phillipston, MA 01331 Posts: 635 | From: Phillipston, MA | Registered: Sep 2002
| IP: Logged |
posted
Will the vytek run off a Standard G-Code. (.TAP) File. I know on my first router we had to save the files as Gcode in Enroute then do a conversion in the CamTec Software to there propierty code.. Was a real Pain hence never buying a CamTec Again.
Or you may look at a controller upgrade.. Joe Crumley turned me onto this company and This is what we will be doing on our old PeaShooter ShopBot (As Dan would Say)
I was in touch with North East Electronics. They have since merged with Cleveland Motion Controls in Cleveland, Ohio. They are the original manufacturer of the controller for our machines. They may be able to answer our questions about upgrading.
I dealt with a guy named Mark when it was North East Electronics. I had to have a controller board replaces about 3 years ago. I will give him a call and see what he says.
-------------------- Jerry VanHorn, Pres. Pure Sports Designs, LLC Pro Sign Design / United Wholesale Signs www.prosigndesign.comwww.unitedwholesalesigns.com West Liberty, OH 937-465-0595 866-942-3990 Since 1990 Posts: 925 | From: West :Liberty, OH | Registered: May 2004
| IP: Logged |