posted
Any help will be appreciated... I've had several times when my SP-300V stalls partially through a print job. No message on the machine other than "now processing," and nothing unusual on the VersaWorks screen either. Software is current, no other programs (other than flexi) running, should have enough RAM. Any way to get the machine to finish the job? I hate aborting and loosing the output only to start the print job over.
posted
We do get the odd job that hangs, and not just with the roland, I can reproduce the error on other PS printers in the shop. Probably a postscript error. Usually happens when I've imported elements from different formats into Corel. Might be the same with Flexi.
Flatten the job and sent it as a .tif
[ December 12, 2006, 10:30 AM: Message edited by: Mike O'Neill ]
-------------------- Mike O'Neill
It has yet to be proven that intelligence has any survival value. - Arthur C. Clarke
Laura - I have not re-installed the SW yet. Good thought, I'll try that. Mike - good suggestion to send as a tif. Peter - Never does finish the job, and I've had the problem with different media types. I'll pay more attention to the sensor in the back though.
posted
When you go to print are you hitting "Rip & Print" or are you hitting "Rip only" and then going to your rip quere's to print...if you do not have enough memory and use the "rip and Print" option, the machine will out pace you computer and cause an error...
Shawn
-------------------- Shawn Setzer Signs by Shawn 826 Hwy 47 East, Troy, MO Posts: 241 | From: Troy, MO, USA | Registered: Jan 1999
| IP: Logged |
posted
sometimes it's as simple as an anti virus program or windows doing an upgrade at an inopportune time, watch for that as well, we'll keep an eye out for other answers as well, good luck!
-------------------- Pete Payne Willowlake Design/Canadian Signcrafters Bayfield, ON
Printer-friendly view of this topic