posted
Hey here's an opportunity! I am pricing out a sandblasted sign and I'd like to sub it out to someone that can perform the following:
4'x6'8" redwood sandblasted both sides and finished.
I'll make the hardware and pick it up within reasonable distance (ME, NH, MASS,VT).
I'll fill you in with details of my specs if it's something you are interested in. I'm not looking for low budget... I'm just to busy for this one and it's for a good customer.
-------------------- "No excuses!.... No regrets!..."
I have found nobody local, or anyone in New England. We will have either J.P.S., or Sharp signs sandblast for us, and we will finish it. Sometimes we will have them finish it for us. There is a company that I do not think is here on Letterheads called Plymouth Sign Co., they do very nice work, and they will sandblast wholesale. I have never used them before, but I have gotten quotes. I am not sure if they will just sandblast, they may want to finish the whole sign. I have called around to local memorial shops, they will not sandblast for me using my own sub-straight. Good luck. (edited) Heya, just looked a your site, you have some real kick ass stuff, really great work. Id love to see it sometime.
posted
http://www.leightonsign.com/ he's a friend of mine in topsham maine...great guy and does sandblasting...not sure if he's too busy but worth a shot. see ya in the maritime!
-------------------- Karyn Bush Simply Not Ordinary, LLC Bartlett, NH 603-383-9955 www.snosigns.com info@snosigns.com Posts: 3516 | From: Bartlett, NH USA | Registered: Jan 2001
| IP: Logged |
posted
Het Dagger rat! buy the roll of anchor sandblast mask from your sign supplier, you can cut it on most sign plotters. mask it up and bring it to your local tombstone shop (unfourtunatly we all got one) and have them blast it for ya, they usually blast it pretty cheap.
-------------------- Ken McTague, Concept Signs 57 Bridge St. (route 107) Salem MA 01970 1-978-745-5800 conceptsign@yahoo.com http://www.pinheadlounge.com/CaptainKen
---------------------------------
"A wise man once said that, or was it a wise guy?" Posts: 2425 | From: Salem, MA | Registered: Apr 1999
| IP: Logged |
Were you able to come up with a source for sandblasting? I am curiours to see how the job will turn out. We don't see too many sandblasted signs around here. Just a few I could think of. Keep us posted, good luck.
-------------------- Devin Fahie Sebago Signworks Rt. 302, Raymond, Maine 207-655-6622 devin@sebagosignworks.com Posts: 96 | From: Raymond, Maine | Registered: Jun 2003
| IP: Logged |
![[Wink]](wink.gif)
Printer-friendly view of this topic