posted
Somewhere I think there was an article called "Fun with PVC" or something like that and I can't find it. It was bent into a scoll and the edges were burnt with a torch.
Anyone know where I saw it?
Thanks, Tony
-------------------- Ace Graphics & Printing Camdenton, MO. USA
I have done a scroll just as you mentioned about 12 feet long and 18 inches high. If you have any questions feel free to call or e-mail. It is quite easy to do.
Rob
-------------------- Rob Larkham Sign Techniques Inc. Chicopee, Ma Posts: 607 | From: Chester, Ma. | Registered: Apr 2002
| IP: Logged |
posted
Tony, go for it, it is fun to play with PVC. Just put on some gloves and start heating and bending till you get the feel of it. If I can do it anyone here can!
Mark Matyjakowski did the most incredible hockey shirt for the 1st. panel swap. It was formed PVC.
-------------------- Kathy Joiner River Road Graphics 41628 River Road Ponchatoula, La.70454
Old enough to know better...Too young to resist. Posts: 1891 | From: Ponchatoula, LA | Registered: Nov 2000
| IP: Logged |
posted
Thanks for the replies. I'm sure there will be a question or two. It was driving me nuts looking for it, but when Jerry gave me the issue of Signbuilder it was in......sure enough there it was.
I bought a 4x8 sheet to play with....now I just have to find a little time. Looks like fun!!
Thanks again, Tony
-------------------- Ace Graphics & Printing Camdenton, MO. USA
Printer-friendly view of this topic