Yesterday, Don put Bondo over some nail holes
in a sign we are working on, it was near a molding that we had glued. Some of the glue had expanded and soaked into the foam, right near the nail holes.
About 15 minutes in to project, Don fell to the floor, head spinning and black out condition, shortly after, he vomited and we sent him home, not knowing what had happened.
I continued to work in the shop all day and into the night with no problem. But this morning when I started to sand the Bondo, I realized the bondo didn't cure. ( it occured to me this was the problem )Then after 5 minutes of me scraping the bondo off the sign, I too started my head spinning and started to black out.
This chemical reaction is worse than leaving the can of brush cleaner opened, or leaving the cover off the frog juice.
Damn my head hurts.
------------------
Bob Rochon
Creative Signworks
Millbury, MA
bob@creativesignworks.com
"Some people's kids"
------------------
St.Marie Graphics
& Makin' Tracks Sound Studio
Kalispell, Montana
stmariegraphics@centurytel.net http://www.stmariegraphics.com
800 735-8026
We're chiseling every day of the week! :^)
------------------
Wright Signs
Wyandotte, Michigan
Since 1978
http://www.wrightsigns.bigstep.com
We use these two items in close proximity all the time and never knew there was a potential risk. Ever try to mix bleach and ammonia together? Whew! Thanks for bringing it to our attention.
------------------
Joe Rees
Cape Craft Signs
(Cape Cod, MA)
http://www.capecraft.com
http://www.dave-joe-show.com
e-mail: joerees@capecraft.com
------------------
Dave Utter
D-utterguy on chat
Sign Designs
Beardstown, Il.
utter@fgi.net
Joe I really don't know how this all transpired but for the record I will explain what we did.
we had a square panel with a slight arched top, the whole panel had a 1" routered molding around edge.On the arch we needed to bend the molding. Being that it was a 1" molding, it didn't bend too easy so we had to set nails in the main panel to hold the molding while we bent it around the arch.
When we had the right form, we removed the molding, applied the gorilla glue, then reapplied the molding, weaving it back through the nails, on the ends we nailed throught the molding into the flat panel to hold it in place. Then clamped it.
The next morning we removed the clamps and the nails, now we had to clean up the expanded gorilla glue and fill the holes. We did apply the bondo right on top of where the expanded glue had been. ( it seems as if the glue also soaks into the foam )
So the glue WAS dry. We always mix our bondo to a dark pink mixture so it will cure fast.
And that was it, no weird science here. We had been glueing for 2 days on other parts of sign so I doubt it was the glue itself. Also it was not untill I started to sand and scrape the uncured bond that the toxic stuff happened.
I will note that there is NO smell, and when I applied my respirator my head stopped spinning. So take this info as you will. I won't be trying this one anytime soon.
------------------
Bob Rochon
Creative Signworks
Millbury, MA
bob@creativesignworks.com
"Some people's kids"
------------------
The SignShop
Mendocino, California
"Where the Redwoods meet the Surf"