anyone know where I can get: 5" circle with 1" hole, stamped out of a nylon or plastic type material 30ml. need 200 maybe more Thanks
[ March 25, 2011, 02:39 PM: Message edited by: Wayne Webb ]
Posted by Blake Koehn (Member # 5984) on :
don't you own a router?
Posted by Mike Faig (Member # 6104) on :
Smartass.
Posted by Bill Wood (Member # 6543) on :
King International Corp, has die cuting capability with whatever substrate you need.I do not know what their quanitity amounts are.This is the number to reach them here in NC.
Chris Smith KIC CORP 336-983-5171
Posted by Dave Sherby (Member # 698) on :
You might be better off cutting them on your router since even a simple die can be very expensive. But if getting the material is a problem, maybe one of these would help. Some materials can be laser cut, eliminating the expense of making a die.
[ March 26, 2011, 02:53 PM: Message edited by: Dave Sherby ]
Posted by Wayne Webb (Member # 1124) on :
finding material was my problem, no one around here carried anything that thin, and you had too buy way too many sheets to get them to order it. I had someone quoting this, but still haven't heard from them. Thanks guys, I'll try some of these.
Posted by Wayne Webb (Member # 1124) on :
material should be .030 mil. sorry
Posted by Mike O'Neill (Member # 470) on :
Lamacoid plate for engraving comes in 1/32 thickness (.03125)"
Fairly common stuff, available in a selection of colors, and cuts easily with laser
[ April 02, 2011, 09:15 AM: Message edited by: Mike O'Neill ]
Posted by Kathy Weeks (Member # 10828) on :
Hi Wayne - here is one more reference to try: Cope Plastics Inc. - they have a shop in Godfey, IL and Vadnais Heights, MN. www.copeplastics.com Ann Bell is my contact person, here in MN, and the toll free # is: 1-866-834-4792 They carry every kind of plastic you want, and have the knowledge that goes with it. They are very nice folks and can give you a free quote. I hope this helps!
