posted
after spending DAYS trying to get the system to cooperate, I finally got the plotter to at least acknowledge the computer through the correct port with sounds and paper feed. . . . . . only problem is, it does not print what is on the cut que. I am using Ultra-Flex from Beacon Graphics and Windows XP. the data that the plotter is spitting out is a MILES and MILES string of just random numbers, periods and commas. sample: 02. 8. 1. - 3. - . - 31... 326 yada yada yada anyone ever experience anything like this before ?? I boot, boot and reboot the whole system and the results are the same. could it be the driver not corrected properly ?? I am at my wits end with thing.
this is the Roland CAMM-1 / PNC-950 system that I had in storage for 10 years and it is the same as when I last used it. the plotter was wrapped in food wrap so it was airtight and insect proof during storage.
-------------------- John Smith Kings Bay Signs (Retired) Kissimmee, Florida Posts: 816 | From: Central Florida - The Sunshine State | Registered: Jan 2000
| IP: Logged |
Printer-friendly view of this topic