posted
Hi guys. I painted some PVC signs with Kilz 2 Primer and topcoated with white Behr exterior flat house paint. Now, after painting it I realize that the white Behr isn't really white, and doesn't match the metal posts that were painted with an epoxy paint. Can I just prime with Kilz 2 again and roll on some oil based paint, or will the oil based paint not stick to Kilz 2? Any suggestions?
Thanks always! Felix
-------------------- Felix Marcano PuertoRicoSigns.Com Luquillo, PR
Work hard, party like a tourist! Posts: 2274 | From: Luquillo, Puerto Rico, USA | Registered: Nov 2000
| IP: Logged |
Making the simple complicated is commonplace; making the complicated simple, awesomely simple, that's creativity. — Charles Mingus Posts: 6712 | From: Mendocino, CA. USA | Registered: Nov 1998
| IP: Logged |
Making the simple complicated is commonplace; making the complicated simple, awesomely simple, that's creativity. — Charles Mingus Posts: 6712 | From: Mendocino, CA. USA | Registered: Nov 1998
| IP: Logged |
posted
Dont have an answer- just wanted to say, I'm coming pretty close to you next week- going to Santo Domingo Dominican Republic- I know its still a long way from Puerto Rico, but still much closer than arkansas is...
-------------------- Michael Clanton Clanton Graphics/ Blackberry 19 Studio 1933 Blackberry Conway AR 72034 501-505-6794 clantongraphics@yahoo.com Posts: 1735 | From: Conway Arkansas | Registered: Oct 2001
| IP: Logged |
Printer-friendly view of this topic