posted
Switched from a GS15 to a Gerber HS15 plotter (not plus model). I'm using Flexisign. I swapped the plotters, told flexi it was now an HS15. When I send the job it only cuts the first "packet of information" it seems. With 6" text reading RAFT, it might cut the majority of the R, then stops. Light doesn't blink, no errors, just stops. When I turn the plotter off, and start again, it MAY cut more/next packet of info, or it might not.
Any suggestions?
Phil Steffen
-------------------- Phil Steffen, 29 Van Rensselaer St City of Saratoga Springs DPW Saratoga Springs NY 12866 Posts: 563 | From: beautiful Saratoga Springs NY | Registered: Aug 2001
| IP: Logged |
-------------------- Phil Steffen, 29 Van Rensselaer St City of Saratoga Springs DPW Saratoga Springs NY 12866 Posts: 563 | From: beautiful Saratoga Springs NY | Registered: Aug 2001
| IP: Logged |
posted
Philip, I'm sure there are many others like me who have read this and not responded to your plee as I do not have answers for you.....don't give up...hopefully someone will know and chime in soon. Wish I could help.
-------------------- Susan Banasky Source Signs Nanaimo, British Columbia sourcesigns@shaw.ca
When in need....go directly to the "Source"!
Proud Supporter of this "Knowledge Network"! Posts: 1323 | From: Nanaimo, B.C. Canada | Registered: Oct 1999
| IP: Logged |
-------------------- Phil Steffen, 29 Van Rensselaer St City of Saratoga Springs DPW Saratoga Springs NY 12866 Posts: 563 | From: beautiful Saratoga Springs NY | Registered: Aug 2001
| IP: Logged |
posted
you sure its got the correct cable between the puter and cutter? And do you have the correct port settings. Because ti sound like the signal to send more data is not getting back to the computer
-------------------- Leaper of Tall buildings.. If you find my posts divisive or otherwise snarky please ignore them. If you do not know how then PM me about it and I will demonstrate. Posts: 5273 | From: Im a nowhere man | Registered: Jul 2001
| IP: Logged |
Printer-friendly view of this topic