posted
Hi Neil, I get all my blanks from Ideal Metals. Here's the phone number for the branch in Brampton, ON. (905) 456- 3350. They may have a branch in your neck of the woods also.
posted
Any place that has a CNC lazer can cut you the shapes. I had 30 large peices of 1/8 6061 AL cut last year to custom shapes including mounting holes then had them powdercoat them. If you cannot find anyone there are various locations here in Ontario that I have used.
(Edited) to add that lazer cutting was significatly less expensive than Waterjet.
[ April 05, 2011, 01:17 PM: Message edited by: Mark Pinkse ]
-------------------- Mark Pinkse Laird Signs Iron Bridge ON. Canada Posts: 52 | From: Iron Bridge, ON Canada | Registered: Nov 1999
| IP: Logged |
posted
Thanks, Rick is that Number correct? It seems to be not working, I get a busy signal right away. Mark can you steer me in the right direction for a supplier?
Thanks Again
-------------------- "Keep Positive"
SIGNS1st. Neil Butler Paradise, NF Posts: 6277 | From: St. John's NF Canada | Registered: Mar 1999
| IP: Logged |
posted
Hi Neil, I checked with the Calgary office and they said there's an office in Saint johns also. They also have changed their name to Ryerson Metals and Alloys. Here's the contact info for the Saint johns office.
Saint John 2 Whitebone Way Saint John, NB E2J 4W2 506-633-0081 1-800-561-9746 506-633-5036 Fax
posted
Hi Neil, Forgot to mention a company I use in Alberta. Their a large operation, but their service has always been good and they don't mind dealing with small shops. The company name is Grant Metals. I've posted a link to their web site.