This Covid19 has changed everything without a doubt. Although we keep busy in our shop (on our home property) the last of our staff is off for the duration as of this afternoon. Our property gate is locked tight with phone numbers posted for contact for deliveries and such.
The isolation feels weird already.
It is time to reach out and reconnect to our friends on Letterville.
Post a recent project you have enjoyed. Let's share and encourage each other through this time.
Stay well!
Here's a recent project of ours that is awaiting delivery...
[ March 20, 2020, 02:44 PM: Message edited by: Dan Sawatzky ]
Posted by Alicia B. Jennings (Member # 1272) on :
Truck, HOK Silver Metallic with a HOK Kandy airbrushed over it. Kandy airburshed over Avery "Silver Leaf" vinyl. [IMG][/IMG]
Posted by Don Hulsey (Member # 128) on :
My biggest project lately has been cleaning the shop. They say this could last til August, and with a little luck, I might be done by then. Not photo worthy at this time. I actually have a bigger mess now than I did when I started. I have a pickup bed trailer with a camper top that I have filled twice, and plan to fill a few more times.
Posted by PatRaap (Member # 4290) on :
We just finished this project.
[ March 22, 2020, 09:09 PM: Message edited by: PatRaap ]
Posted by Dan Sawatzky (Member # 88) on :
Pat Is that routed in two pieces? It looks to be about 24" across. How thick??
-grampa dan
Posted by PatRaap (Member # 4290) on :
The Sietsema is a seperate piece, and we used 1.5" thick HDU for the back, and the Sietsema was .5" thick. You were close on size - 27".
![[Smile]](smile.gif)
