This is topic Gerber 4b need help engaging commands in forum Letterhead/Pinstriper Talk at The Letterville BullBoard.


To visit this topic, use this URL:
http://www.letterville.com/ubb/ultimatebb.php/topic/1/62551.html

Posted by Deb Fowler (Member # 1039) on :
 
Help need to make graduation banners for my granddaughter for tomorrow and had everything set up (I thought).

Yes, my 4b was in storage for 4 years and not used. I am not using the lmk so it is right from the plotter.
(and I am completely out of paint).
I usually have no problems through the years. The led display lights up and it registers the fonts that I put in, but after that no commands will work. I have checked all the connections, and could it possibly be a fuse, if the lights come on the led? Any ideas?

[ July 24, 2015, 08:02 PM: Message edited by: Deb Fowler ]
 
Posted by Chuck Peterson (Member # 70) on :
 
I recall a couple times a key, maybe the spacebar getting stuck down and nothing works until it's popped back up.
 
Posted by Deb Fowler (Member # 1039) on :
 


[ July 24, 2015, 08:52 PM: Message edited by: Deb Fowler ]
 
Posted by Deb Fowler (Member # 1039) on :
 


[ July 24, 2015, 08:55 PM: Message edited by: Deb Fowler ]
 
Posted by Kevin W. Betz (Member # 4133) on :
 
Hi Deb.

I have an original Manual for the 4b. If you want to
call me i can try to go over your problem with you. my # is 586-709-1583.

Kevin
 
Posted by Deb Fowler (Member # 1039) on :
 
Hooray!!!!!!!! I went back up there and turned on the overhead light in the spare room.

I found a penny stuck in between two of the keys; it solved the problem!!!!!!!!

Kevin, thanks so much also for offering; I found the manual in two steps online and I can print it out for future reference.
Thank you both so very much as this is why letterheads have enriched me throughout the entire time I have been here in letterville.
 


Powered by Infopop Corporation
UBB.classic™ 6.7.2