This is topic OT - Darwin Award candidate - OT in forum Letterhead/Pinstriper Talk at The Letterville BullBoard.


To visit this topic, use this URL:
http://www.letterville.com/ubb/ultimatebb.php/topic/1/29074.html

Posted by Si Allen (Member # 420) on :
 
My vote for Daewin Award of the Year!


 -


[Eek!] [Dunno]
 
Posted by Ryan E Young (Member # 2325) on :
 
Dont worry SI I am sure it is a treated 4x4 [Smile]
 
Posted by Nevman (Member # 332) on :
 
Funny place to put lettering on a truck ?????

[Dunno]
 
Posted by James Donahue (Member # 3624) on :
 
I studied the picture a little, then I noticed that the red thing is a welder, not a charger, and this guy's probably under there welding with squinted eyes, no mask. You're right Si, that is dangerous!

As far as the truck being tilted, it might actually be so high that it's at the balancing point, it could go either way. The poles are just to keep it a little this side of that point. Man I declare, why do the other guys always get the really good idea?

How did I figure this out? It takes a redneck to know a redneck! [Applause]
 
Posted by Jane Diaz (Member # 595) on :
 
Hey, maybe he is welding the gas tank!! [Eek!]
 
Posted by Greg McRoberts (Member # 3501) on :
 
Well, at least he chocked the right rear tire. Safety first you know!
 
Posted by Dan Streicher (Member # 4515) on :
 
you can't keep the stupid people from hurting themselves....just think the accidents that happen from doing these types of things are kind of like throwing a little chlorine in the gene pool...

I had another sign co. owner ask me to help him with a installation one evening I knew things were wrong when he wanted to wait for it to be dark(there's a big hint) then he proceded to set up his ladder on top of his work van and wanted me to drive, but slowly along the area that he was applying the graphic to so that he would not have to climb off of the ladder to move it....if he is reading this he will surely remember it and know who he is (I'm not going to give his name but if he wants to he will) ABOUT THE DUMBEST thing I'd ever seen someone do for an installation...but it worked, and then there was this time that same guy rented a lift (guess he didnt have a ladder to setup on top of the van that was long enough...where's big top when we need it) but he dumped the lift with both of us in it...but thatis a whole nother story I'll save it for another time I have to get some work done
 
Posted by Ron Costa (Member # 3366) on :
 
[Eek!]
Scheeeeessssssch,
I would have parked next to a meter so I coulda hitched a come along to it......
 
Posted by Terry Baird (Member # 3495) on :
 
95% of all redneck deaths occur after the words..."Hey watch this"...
 
Posted by Ray Rheaume (Member # 3794) on :
 
Cool!
This chump has invented a whole new way to become STREET PIZZA !

Five bucks says he's the fastest welder in town under those conditions....any takers? [Eek!]
Rapid
 
Posted by Randy Campbell (Member # 2675) on :
 
No brain no pain. [Dunno] [Dunno] [Roll Eyes]
 
Posted by dave parr (Member # 3868) on :
 
Yep, ...if it isn't tank welding, it's close.

 -

?? [Dunno] ??
 
Posted by Kissymatina (Member # 2028) on :
 
Geez, I feel really sad for that guy. He doesn't have any friends to hold the truck up for him, the real redneck way, and had to pull down the posts holding his front porch roof up just to weld his gas tank. You should all be ashamed of yourselves for making fun of him. [Wink]
 
Posted by Tony McDonald (Member # 1158) on :
 
Maybe that's just how he parks!!! [Big Grin]

He should have just rolled it on over and welded it!

What I'm really wonderin' is how did he get it jacked up that high?
 
Posted by Gavin Chachere (Member # 1443) on :
 
$5 says he posted on an internet BB and this was a conglomeration of advice
 
Posted by jack wills (Member # 521) on :
 
Si, Did you notice my six pack
of Pacifico
by my left hand?

Crazyjack
 
Posted by Jillbeans (Member # 1912) on :
 
Aww Si,
He was jist riggin it up so's he could have a swimmin' pool like his Cousin Cletus!
 -
Love...Jill
 
Posted by Wayne Webb (Member # 1124) on :
 
Cute....but nobody's that stupid.
Whoever did the photoshop job forgot to simulate the flash on the front of the welder and his helmet. I can't even see a helmet. Also, does an arc welder or mig welder have leads that long?
 
Posted by Sheila Ferrell (Member # 3741) on :
 
WAYNE (& others)!
As a fellow suth'ner I take off - HENCE!!

This is a common occurence 'round these parts.
I do not understand why y'all find this so unusual or why you Wayne would even consider this to be a fabrication.


(giggle)

I have also seen the pool thing...it is common during a heavy snake season or for baptisms . . . . but not very many people have new plastic without holes . . . so....
(lol)
 
Posted by Wesley Lewis (Member # 4642) on :
 
When your BROKE sometimes you're forced to stick yout neck out a little to getterdone.
 
Posted by Bill Diaz (Member # 2549) on :
 
Street pizza! Oh man I can't stop laughin'!
 
Posted by Cam Bortz (Member # 55) on :
 
Hey mon, you hear 'bout Julio? He had his pickup waay up on steeks, mon, and he wass welding the leek in the gosstonk, see? De gosstonk went kaboom an' Julio wen' backuds an he knock down de steeks. De truk she fell on Julio an' catches fire, mon. Eet wass a reel mess, an' de cops an' de firemon say he wass cooked like a fajita, mon. Dat poor Julio wassen ever too bright, cha'no?
 
Posted by Bill Biggs (Member # 18) on :
 
I had a neighbor that got killed in a similar accident, except he had his house trailer jacked up
fixing a plumbing leak. Desperate people take desperate means.
Bill
 
Posted by Talisman (Member # 1869) on :
 
Hey, I just lettered that truck...

 -

*disclaimer: I used the customer's original artwork*
 
Posted by Steve Burke (Member # 2674) on :
 
If someone Photoshop'd in the arc welder then maybe they Photoshop'd in the posts, and he is really holding up the truck with his head!!! Those Fraternity punks will do anything to get in!!!!!
 
Posted by Sheila Ferrell (Member # 3741) on :
 
LOL Abner!!!

I LOVE yer work, great design! [Big Grin]
 
Posted by Dave Sherby (Member # 698) on :
 
My main competitor went to a lumber yard and "borrowed" a 14 foot 2x4(yes, he was too cheap to buy it) put it between 2 posts and him and a helper each went up ladders leaning on the 2x4 with a 4 x 8 sign panel. You guessed it, the 2x4 broke, he broke his arm. He tried to sue his customer, it happened on his property, the lumber yard for "lending" him a defective 2x4, and his lawyer even found the lumber mill that made the 2x4 and named them in the suit. He was after medical bills and pain and suffering. Because of all the different states involved, it had to go to federal court. We need more judges like this guy. He threw the case out and admonished the lawyer for bring a frivolus lawsiut to court. This guy is a dandy. No insurance, will use my designs without thinking twice, uses substandard materials, I could go on all day.
 
Posted by James Donahue (Member # 3624) on :
 
Hate to beat a dead horse, but Wayne's photoshop idea is making more sense.

For one thing, those poles are at a bad angle, just ready to slide out. Also, whatever means he used to jack it up should still be there. I mean, you'd have to go through a lot of work to build supports that high for your jack. You need at least two, probably more. You put your jack on one, then build up the other one, let the vehicle down on the higher one, lower the jack down, put wood under it, jack up, repeat process.

All very time consuming, and you'd need it for going back down. Plus it's a bit reasuring having those extra supports there while working. So there's no reson for removing them.

Unless of course, the thing was lifted with a fork lift or other power equipment. But even then, the forklift operator would have to return to lower the truck. Is he in such a hurry that he can't stick around while you make your weld? Maybe doesn't want to be around for the tank welding.

And who's standing just outside the picture, casting a shadow? In a city that knows how to keep it's secrets, it's time to call Guy Nuor (sp?).
 
Posted by Bill Diaz (Member # 2549) on :
 
Not to belabor this post any more, but one of my favorite recipients of the Darwin award was the 2 rednecks from Arkansas. They were out frog fishin' and when it was time to go home, the truck wouldn't start. It seems the guy had trouble with the fuses in the past and sure enough the fuse was the culprit again. Lo and behold he was out of fuses, but found a bullet in the glove compartment and putting 2 and 2 together decided to put the bullet in where the fuse was supposed to go and sure enough the bullet allowed the electricity to pass and the truck started up. They went about a 1/4 mile down the rode when the bullet heated up and fired out hitting the other guy in his "jewels."

When they got to the hospital and the story unraveled, all nurses and doctors could hardly keep a straight face, but when the wife came to pick her husband up, she could have cared less about his jewels, she just wanted to know if he caught "them there frogs." Then the place really did go up for grabs.
 
Posted by Jane Diaz (Member # 595) on :
 
I did a serach and found the original article Bill was talking about...he has MOST of the details right...
Finally, THE WINNER!!!: [Arkansas Democrat Gazette]: Two local men were injured when their pickup truck left the road and struck a tree near Cotton Patch on State Highway 38 early Monday. Woodruff County deputy Dovey Snyder reported the accident shortly after midnight Monday. Thurston Poole, 33, of Des Arc, and Billy Ray Wallis, 38, of Little Rock, were returning to Des Arc after a frog gigging trip On an overcast Sunday night, Poole's pickup truck headlights malfunctioned. The two men concluded that the headlight fuse on the older-model truck had burned out. As a replacement fuse was not available, Wallis noticed that the .22 caliber bullet from his pistol fit perfectly into the fuse box next to the steering-wheel column. Upon inserting the bullet the headlights again began to operate properly, and the two men proceeded on eastbound toward the White River Bridge. After traveling approximately 20 miles, and just before crossing the river, the bullet apparently overheated, discharged, and struck Poole in the testicles. The vehicle swerved sharply right, exiting the pavement, and striking a tree. Poole suffered only minor cuts and abrasions from the accident, but will require extensive surgery to repair the damage to his testicles, which will never operate as intended. Wallis sustained a broken clavicle and was treated and released. "Thank God we weren't on that bridge when Thurston shot his balls off, or we might both be dead," stated Wallis. "I've been a trooper for 10 years in this part of the world, but this is a first for me. I can't believe that those two would admit how this accident happened," said Snyder. Upon being notified of the wreck, Lavinia (Poole's wife) asked how many frogs the boys had caught and did anyone get them from the truck??? (Though Poole and Wallis did not die as a result of their misadventure as normally required by Darwin Award Official Rules, it can be argued that Poole DID, in fact, effectively remove himself from the gene pool.
 
Posted by Joe Rees (Member # 211) on :
 
Stop, You're making me cry!

Ok, to alay doubts, here is the actual image with the gamma lightened in photoshop to pull the details out of the shadow. It appears to be a legit photo to me. So there IS a face mask, but does anyone know where the gas tank is on this model truck? It just could be....

 -
 
Posted by Jeff Ogden (Member # 3184) on :
 
Maybe he's makin a little false bottom, under which he plans to put his stash on the next smuggle run.........

...and He had twelve of his friends lift that truck up for him...but when they saw where he was going to weld, they all kind of moseyed off for awhile... [Smile]
 
Posted by Mark Sheflo (Member # 3608) on :
 
Have to reply about Bill & Jane's story...

Snopes.com

If it sounds too good to be true, it probably is.

Been searching for days now about the original photos that Si posted and haven't found anything about it anywhere. Must not exist!

Mark
 
Posted by Sheila Ferrell (Member # 3741) on :
 
UH! JAMES!!

I'm astouded that you too would denounce the legitimacy of this picture . . . . .


I's obvious to me that the 4x4's are caught on the rocky irregular asphalt . . . .I'm sure a coupl'a of his buddies helped him hold it up there 'til he got it propped up good. . . . . yes, they left, but just a beer run at the corner joint . . . . they may are may not come back to help him get it down . . . more than likely he will just join them while it "cools off"......as for Guy Nior . . .unless you see a beautiful girl who was poured into her jeans he is not on site, LOL [Big Grin]

As for welding under there?? TRUE FACT: I got my bent muffler pipe cut and a new peice welded in it right on the rack while I watched . . . . area repaired? right behind the gas tank . . . [Eek!] [Dunno] guy does it all the time though . . . . .



. . . .Ayway, the law prolly got that guy for runnin' "too loud" so he just parked it, propped it, unloaded the welder and fixed the muffler right there, LOL . . . . .


. . . . . .I steel cayn't see y'all don't b'leeve this though . . . . . . . . . . lol
 


Powered by Infopop Corporation
UBB.classic™ 6.7.2