posted
Hello everyone, I have been asked about lettering a dozen or so 'throwaway' t-shirts for a small event. I have noticed that there is iron-on vinyl available for fabric.
Can someone point me to some beginner learning on this stuff as to whats available (types of vinyl), whats needed to transfer and place the graphic on fabric, and what equip. & procedures are needed to transfer the graphic (ironing). I have a Graphtec cutter already so unless I need a special blade for it I should be set in that department.
The shirts are pretty much going to be freebie throwaways, so a cheaper material would be best at the moment.
I also have thought about screenprinting, and at this time I am not ready to try that fiasco again. At least not without learning how to use cut vinyl as my template. That photo-resist stuff requires a little more patience than I can give it..
BTW I enjoyed talking to everyone last night, even if I did miss the SignGold chat. Did anyone record a transcript?
-------------------- John Milleker Baltimore, MD Posts: 42 | From: Baltimore, MD | Registered: Mar 2004
| IP: Logged |
posted
There is some inkjet media that is designed for T shirt graphics. You print your image in reverse and iron it on the T shirt. It will last a few washings.
I did a google search for "iron on transfers" and this is the first thing that came up.
posted
You're refering to a plastisol material. I wouldn't call it cheap, it's one of the more durable products you can iron on a shirt or other fabric. Excellent product for doing names & numbers on team sweaters. its limitations are somewhat like vinyl, for the most part you'll be dealing with 1 spot color and weeding is a factor so design must be fairly simple. Get it from www.stahls.com product is called thermofilm or gorilla grip. Any T-shirt press would work temp is about 325f
-------------------- Mike O'Neill
It has yet to be proven that intelligence has any survival value. - Arthur C. Clarke
posted
Thank you David for the link, i've used printables before with limited success (as much as you would expect). For this job I just need quick one-color lettering which I was hoping I could just cut.
Mike, great link. Looks like they have everything there including better descriptions than i've been able to find, application information, etc.. While still a bit more expensive I should be able to do with just 15"x5yards of the econo stuff.
Thanks for the information! -John
quote:Originally posted by John Milleker: Hello everyone, I have been asked about lettering a dozen or so 'throwaway' t-shirts for a small event. I have noticed that there is iron-on vinyl available for fabric.
-------------------- John Milleker Baltimore, MD Posts: 42 | From: Baltimore, MD | Registered: Mar 2004
| IP: Logged |
How about cutting vinyl masks, weed out the lettering, apply those to the shirts and the dust on a few light coats of spray paint. If you do the coats lightly enough, bleeding shouldn't be a problem.
Good Luck...
-------------------- Pat Neve, Jr. 321-537-8675 Capt. Sign
posted
ive had some goodstuff work with the CANNON injet sheets....you print it on you printer, then iron it on a tshirt....you print a mirror image. also i cut away the rest of the material outside the design , if not it will also adhear to the t shirt.
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
Thank you all for the great info. I really like the spray paint idea Pat!
I called Beacon and they agreed that Cad-Cut Econo is mainly for larger graphics. They said it was do-able to around and larger than 1" lettering. This stuff would not apply without the high-heat of a heat press - no irons.
So i'll try the stencil/spraypaint idea or just bite the bullet and learn this screenprinting using vinyl as a mask stuff.
Thanks again! -John
quote:Originally posted by John Milleker: Hello everyone, I have been asked about lettering a dozen or so 'throwaway' t-shirts for a small event. I have noticed that there is iron-on vinyl available for fabric.
-------------------- John Milleker Baltimore, MD Posts: 42 | From: Baltimore, MD | Registered: Mar 2004
| IP: Logged |
posted
I have used the econprint, from Stahls, for several years. i Have a graphtec 2100 and have no problem cutting/weeding letters as small as .3 inches. For the small stuff, on hats, I have used an iron- no water in it- set on highest setting and used some kraft paper or freezer paper between the iron and the econoprint, press for 15 seconds. If the area of the lettering is larger than the center of the iron, every 8 seconds pick up the iron and move it to another spot. cool peel the backing.
Diane Balch
-------------------- Balch Signs 1045 Raymond Rd Malta, NY 12020 518 885-9899 signs@balchsigns.com http://www.balchsigns.com Posts: 1701 | From: MaltaNY | Registered: Jan 2000
| IP: Logged |
posted
If you use vinyl for a mask, make sure you use premium, and squeegee it down well. It sticks better and you have less problem with paint bleeding underneath. If you have an air brush, createx fabric paints and Deka fabric paints work well- use the vinyl mask.
Diane
-------------------- Balch Signs 1045 Raymond Rd Malta, NY 12020 518 885-9899 signs@balchsigns.com http://www.balchsigns.com Posts: 1701 | From: MaltaNY | Registered: Jan 2000
| IP: Logged |
Cut and press, nice and easy. Ideally, these should be done at 325 degrees for about 10 - 12 seconds, but since these are throwaways, you can probably get away with using a household iron.
hope this helps... Rapid
-------------------- Ray Rheaume Rapidfire Design 543 Brushwood Road North Haverhill, NH 03774 rapidfiredesign@hotmail.com 603-787-6803
I like my paint shaken, not stirred. Posts: 5648 | From: North Haverhill, New Hampshire | Registered: Apr 2003
| IP: Logged |