WELL.....got it workin, did somethin right, found a new driver on the site that makes card. d/l it and installed it 5 times....and i guess i hit it right on that one. IT WORKS!!!! DOS was easier!!!! but ill play with this and see if it will work with corel 10...strange thing in corel 10....you dont need to HAIRLINE objects, if it has color the plotter will work..and if you hairline it it will cut twice.....gee its almost like a real sign program.
Posted by Dave Grundy (Member # 103) on :
Joe..THAT is not Corel 10 it is the Win XP driver. In my case I have to assign the hairline outline and no fill. If I assign a fill only the cutter acts like it's pouncing. If I assign no fill and assign the colour to the outline it cuts perfectly. Welcome to the year 2003 buddy!!!!!!!!! Posted by old paint (Member # 549) on :
i aint got all the bugs worked out yet.....thew way the LTP-3 is workin(dont know what it did with lpt-2) i got the box checked whereit says PRINTER POOLING ..what da hell it does i dont know...but bothe the printer and plotter show up on either port.....hummmmmmmmmmmmmmmmmmmmmmm
Posted by Dave Utter (Member # 634) on :
I've got XP Pro, Corel 10 and I'm running a Mimaki cutter, with their driver. It will cut either just a fill, any color, a hairline outline by itself, or a hairline outline with a fill, and only cut it once. '98 would cut twice if you had anything over .001 for an outline. I think the hairline is actually .003, which would cut twice. A hairline with a fill would cut 3 times. Needles to say, I love XP. You can't screw it up. Welcome to the modern world OP. hehehe.
Posted by old paint (Member # 549) on :
like i said iam "playin" with XP PRO. i got removeable hard drives....so i still got my 30 gig with all my WIN 98SE and COREL 7 for work....