This is topic EMAIL FONTS in forum Old Archives at The Letterville BullBoard.


To visit this topic, use this URL:
http://www.letterville.com/ubb/ultimatebb.php/topic/13/2230.html

Posted by Bob Ficucell (Member # 1460) on :
 
Need some help, I had a friend email me a font as an attachment, it says wfn , however it;s a "RED A"(adobe?) after I save it to a floppy when I try to open it a message says "not a valid font file "
what am I doing wrong ?
I'm trying to install in Signlab 5.0

------------------
Bob Ficucell
Signworks
Canoga Park, CA,
jeanroda@earthlink.net


 


Posted by Tony McDonald (Member # 1158) on :
 
Bob, I think it needs installed. Do you have "Adobe Type Manager" or "Bitstream Font Navigator" on your computer? If not you can install it to your fonts folder. Go to the contol panel and there is a folder called fonts. Open it and go to "file" and then "install new font" Direct it to your floppy disk or where ever you put the font and that should install it for use in your program.

------------------
When good things happen...that must be a sign!!
Tony McDonald
DBA-Ace Graphics & Printing
P.O. Box 91
Camdenton, MO. USA
(573) 346-6696
<daddyo@advertisnet.com>
<tony@brownbeverage.com>


 


Posted by Glenn Taylor (Member # 162) on :
 
WFN is the old propriatary font format for Corel Draw. You would need Corel 3 or older or SignLab to use it.

------------------
Warning: A well designed sign may cause fatigue due to increased business.
http://members.tripod.com/taylor_graphics
walldog@nc.rr.com



 


Posted by Bob Ficucell (Member # 1460) on :
 
Glen,
I have SIGNLAB 5.0 ,still open it !

------------------
Bob Ficucell
Signworks
Canoga Park, CA,
jeanroda@earthlink.net


 


Posted by Rick Sacks (Member # 379) on :
 
Bob, I sent a zipped file to you that was part of the old Corel and will permit opening of those fonts. Danny Baronian and I went through that once.

------------------
The SignShop
Mendocino, California
"Where the Redwoods meet the Surf"

Oh, for the faith of a spider! He begins his web without any thread.



 


Posted by Mike Pipes [in a cubicle] (Member # 1841) on :
 
The floppy disk might be bad..

But just save the attachment into a temporary directory on your hard drive then open the Adobe Type Manager (since the file has the "A" icon, I know you have the ATM on your system).. when you open the Adobe Type Manager, add that font to the system.. you just need to tell ATM to find the font where you put it.

------------------
Mike Pipes
-----trapped in a box with a computer and a slice of cheese-----
 




Powered by Infopop Corporation
UBB.classic™ 6.7.2