Greetings Letter"burgh" folks. blue reflective 3 " wide tape for VFD equipment needed, 40 ft.( blue scotchlite color-pepsi sorts tone ) got any source ? or leftover from a job ? thanks upfront Mark Z....the "rookie" of Southern Md.
Posted by Henry Edmonds (Member # 2145) on :
If it need to be 3M I typically buy from Trim USA they have a place in NC and PA... they also sell there own brand of reflective which is pretty good as long as its going on a fairly flat surface... Also gregory is a good 3M supplier most all the times have what you need in 3M Reflective. We go throw a good amount of this and in my opinion 3M is by far the best and worth it as far as application
Posted by Glenn Taylor (Member # 162) on :
Dittos to Trim USA. Good folks.
Posted by Checkers (Member # 63) on :
Hiya Mark, Where ya been hiding? Although I haven't bought from Trim yet, they seem like a good vendor to work with. However, I've also purchased material from Gregory1.com and Earlmich.com too. If nobody here has extra, check the above company's overstock. And one more thing, I would prefer to get striping tape with the premask already applied. It makes the job go smoother with less issues - especially if you install the stripes dry.
